YSI 600LS - User Manual - Manual (Page 70)

Sondes Section 2
YSI Incorporated Environmental Monitoring Systems Operations Manual 2-64
along the x-axis, you may also manually scale the y-axis. This may allow you to discard a noise spike and
obtain better resolution of events unrelated to the noise. Functions like Autoscale, Redraw and Cancel
Limits are all used to “undo” some of the customization functions. Below in Figure 47 you see some of
these functions.
One very commonly used function is Limit Data Set. If you choose this function by clicking on the
highlighted item as shown below, you then use the mouse to move your cursor to the left limit of an area of
interest, click once, then move the mouse to the right limit of interest and click again. The result will be a
close up look at the specific area of the graph you have defined. Refer to Figure 47 and 48 below to see the
results of this particular feature.
Figure 47 Selecting a Subset of Data within a Graph