YSI 600LS - User Manual - Manual (Page 42)

Sondes Section 2
YSI Incorporated Environmental Monitoring Systems Operations Manual 2-36
RECOMMENDED VOLUMES OF CALIBRATION REAGENTS
The approximate volumes of the reagents are specified below for both the upright and inverted orientations.
Note that the volume values are only estimates. The actual amount of calibrator solution required will
depend on how many and what type of other probes are installed in you sonde bulkhead.
Table 1A
6820V2-1 and 6920V2-1 Sondes with Standard Calibration Cup *
Probe to Calibrate Upright Inverted
Conductivity 200ml 150ml
pH/ORP 125ml 175ml
ISE 125ml 175ml
All Optical Sensors 50ml DO NOT CALIBRATE***
Table 1B
6820V2-1 and 6920V2-1 Sondes with Optional Extended Calibration Cup*
Probe to Calibrate Upright Inverted
Conductivity 320ml 150ml
pH/ORP 240ml 175ml
ISE 240ml 175ml
All Optical Sensors 225ml DO NOT CALIBRATE***
Table 2
6820V2-2 and 6920V2-2 Sondes with Extended Calibration Cup *
Probe to Calibrate Upright Inverted
Conductivity 310ml 150ml
pH/ORP 200ml 150ml
ISE 200ml 150ml
All Optical Sensors 225 ml DO NOT CALIBRATE***
Table 3
600XL and 600XLM Sondes
Probe to Calibrate Upright Inverted
Conductivity 50ml 50ml
pH/ORP 25ml 50ml
Table 4
6600V2-2 Sonde with Short Calibration Cup and Long Cup in Parentheses*
Probe to Calibrate Upright Inverted
Conductivity 425ml (650ml) 250ml (250ml)
pH/ORP 300ml (500ml) 250ml (250ml))
ISE 300ml (500ml) 250ml (250ml)
All Optical Sensors 180ml (500ml) DO NOT CALIBRATE***
Table 5
6600EDSV2-2 Sonde with Short Calibration Cup and Long Cup in Parentheses*
Probe to Calibrate Upright Inverted
Conductivity 275ml (520ml) 350ml (350ml)
pH/ORP 175ml (400ml) 350ml (350ml)
All Optical Sensors 225ml (420ml) DO NOT CALIBRATE***