Singlehop tunnel, Table a-10 – Cisco 6400 User Manual

Page 25

Advertising
background image

A-25

Cisco 6400 Equipment Module Configuration Guide

OL-1812-01

Appendix A Attribute Reference

Singlehop Tunnel

Singlehop Tunnel

Object Name: C4mtTunnel

OAF: C4mtTunnel.oaf

Authentication [c4_authenticate]

This is the authentication type.

W

ms-chap, pap, chap,
callin, optional,
one-time (or a
combination of these
in the correct
sequence)

Unnumbered IP Address in VT [c4_vt_ipaddr]

Specify an interface or subinterface that will enable IP without a static
IP address (i.e. fastethernet 0/0/0).

W

Text (40)

Table A-9

NRP Internal PVC (continued)

Attributes

Acceptable Values

Default Values

Table A-10 Singlehop Tunnel

Attributes

Acceptable Values

Default Values

Common Attributes

Customer [vpn]

This is the customer name.

W

Text (16)

Domain [domain]

This is the domain name.

W

Text (16)

Tunnel Specific Parameters

Service Name [servicename]

This is a key for binding subscriber traffic. This attribute is valid for
tunnels of type dial_out_s only.

W

Text (32)

Dial In/Out [dial_type]

This is the dial type for the tunnel.

W

Enum (10)
dial_out_s, other

Tunnel Type [tunneltype]

Specify the tunnel type.

W

Enum (4) l2tp, 12f,

Advertising