Cisco 6400 - Manual (Page 36)

A-36
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
Appendix A Attribute Reference
Virtual Template
Virtual Template
Object Name: C4vtVT
OAF: C4vtVT.oaf
Virtual Template Parameters
Authentication [authentication]
This is the authentication type. When none is selected, no
authentication will be performed. PAP will enable Password
Authentication Protocol to authenticate the tunnel. CHAP will enable
Challenge Handshake Authentication Protocol to authenticate the
tunnel.
C
Text (80)
Unnumbered IP Address [c4_vt_ipaddr]
Specify an interface or subinterface that will enable IP without a static
IP address (i.e. fastethernet 0/0/0).
C
Text (40)
Contained By
LPort [z_tp.srname]
This is the logical port that contains this VC class.
R | A
Text (32)
Node [srnode.srname]
This is the node that contains the VC class.
R | A
Text (32)
1. Restrictions for each usage parameter are described in Table A-18.
Table A-17 VC Class (continued)
Attributes Acceptable Values Default Values
Table A-18 Virtual Template
Attributes Acceptable Values Default Values
Common Attributes
Domain [domain]
This is the domain. This attribute is optional.
W
Text (16)
Customer [vpn]
This is the customer. This attribute is optional.
W
Text (16)