Cisco 6400 - Manual (Page 34)

A-34
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
Appendix A Attribute Reference
VC Class
Customer [vpn]
This is the customer. This attribute is optional.
W
Text (16)
VC-Class Parameters
VC-Class Name [vcclassname]
This is the VC-Class name as in IOS. By default, this value is
autocalculated, but a value can be supplied.
M | C
Text (16)
Service Name [c4_servicename]
This is the service name key that associates a subscriber with a tunnel.
This attribute is used for static binding only. For dynamic binding,
leave this field empty.
C
Text (32)
QOS [qos]
This is the quality of service.
C
Enum (9) "CBR"
"UBR" "UBR+"
"ABR" "rt_VBR.1"
"rt_VBR"
"nrt_VBR"
"nrt_VBR.1"
"Other"
PCR [pcr]
PCR is the maximum allowed cell transmission rate. It defines the
shortest time period between cells and provides the highest guarantee
that network performance objectives (based on cell loss ratio) will be
met.
C
Numb (10)
Range=0-214748364
7 0
MCR [mcr]
MCR is the minimum cell rate, which is the minimum allocated
bandwidth for a connection.
C
Numb (10)
Range=0-214748364
7 0
NRP->NSP Bandwidth [az_bandwidth]
This is the bandwidth in cells/s from the NRP/NRP2 to the NSP.
M | C
Numb (10)
Range=0-214748364
7 0
NSP->NRP Bandwidth [za_bandwidth]
This is the bandwidth in cells/s from the NSP to the NRP/NRP2.
M | C
Numb (10)
Range=0-214748364
7 0
Table A-17 VC Class (continued)
Attributes Acceptable Values Default Values