Cisco 6400 - Manual (Page 8)

A-8
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
Appendix A Attribute Reference
Node
Containing Region [srarea]
The name of the administrative area containing the router (a LATA, for
example). This attribute is optional.
W
Text (32)
Geographical Location [srgeogloc]
This is the geographical location of the router (for example, a GPS
reference). This attribute is optional.
W
Text (32)
Organizational Location [srorgloc]
This is the organizational location of the router (for example, an X.500
directory reference). This attribute is optional.
W
Text (64)
Pre-provisioned [srpreprov]
Indicates if the object is pre-provisioned or not. The default value is None,
indicating that the node object is not pre-provisioned. If Full or Init is
selected, existing Service Elements (SEs) can be used by new Service
Objects. The Threader will assign the proper SE that matches the Service
Object criteria. In Init mode, if a suitable existing SE is not found, the
Threader will attempt to create one for the Service Object. In Full mode, if
a suitable existing SE is not founds, the Threader will not create one and
report an error. This attribute is effective only when Opaque attribute
(above) is TRUE.
M | C
Enum (4) "Full"
"Init" "None" None
Upload State [srustate]
Indicates the upload status.
W
Enum (13)
Required,
Not_Required,
Indeterminate
Upload State Modification Time [srustime]
Indicates the date and time that the upload state was last modified.
R
Text (24)
Last Successful Upload Time [srutime]
Indicates the date and time of the last upload from this node.
R
Text (24)
Last Upload Type [srutype]
Indicates the type of the last upload from this node.
R
Text (16)
NSP Specific Information
Table A-5 Node (continued)
Attributes Acceptable
Values Default Values