D attaching the presser foot holder, Attaching the presser foot, Removing the presser foot – SINGER 1725 User Manual
Page 24: Attaching the seam guide, Attention, Attaching the presser foot holder
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
m
D Attaching the presser foot holder
Raise the presser bar (a). Attach the presser foot holder (b)
as illustrated. (1)
Attaching the presser foot
Lower the presser foot holder (b) until the cut-out (c) is directly
above the pin (d). (2)
Raise the lever (e).
Lower the presser foot holder (b) and the presser foot (f) will
engage automatically.
Removing the presser foot
Raise the presser foot. (3)
Raise the lever (e) and the foot disengages.
Attaching the seam guide
Attach the seam guide (g) in the slot as illustrated. Adjust
according to need for hems, pleats, etc. (4)
Attention:
Turn power switch to off ("O") when carrying out any of the
above operations!