Inserting the bobbin, Attention – SINGER 1725 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
0
Inserting the bobbin
When inserting or removing the bobbin, the needle
must be fully raised.
- Open the hinged cover (1).
- Hold the bobbin case with one hand. Insert the
bobbin so that the thread runs in a clockwise
direction (arrow) (2).
- Pull the thread through the slit and under the finger (3)
- Hold the bobbin case by the hinged latch (4).
- Insert it into the shuttle (5).
Attention:
Turn power switch to off ("O") before inserting
removing the bobbin.
or
Advertising