Straight stitch and twin needle, Three needle position dial – SINGER 1725 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Straight stitch and twin needle
Turn the stitch selection dial so that the pointer is set
to the straight stitch position.
Generally speaking, the thicker the fabric, thread and
needle, the longer the stitch should be. For a fine
stitch set length at "1" or "2". For gathering set stitch
length to "4".
For twin needle stitching, set needle at middle needle
position. Thread left spool of thread in left needle and
right spool of thread in right needle.
Three needle position dial
The needle position can be altered with the "Three
needle position dial". For normal work, the needle
position is middle. For edge stitching or sewing
parallel lines of top stitch, select needle position left or
right. For twin needle stitching, needle position is
middle.
a. Straight
b. Zig-zag
L. Left needle position
M. Middle needle position
R. Right needle position