Reverse sewing, Removing the work, Cutting the thread – SINGER 1725 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Reverse sewing
To secure the beginning and the end of a seam, press down
the reverse sewing lever (A). Sew a few reverse stitches.
Release the lever and the machine will sew forwards again.
(
1
)
Removing the work
Turn the handwheel counterclockwise to bring the thread take
up lever to its highest position, raise the presser foot and
remove work behind the needle and presser foot. (2)
Cutting the thread
Pull the threads behind the presser foot. Guide the threads to
the side of the face plate and into thread cutter (B). Pull
threads down to cut. (3)
Advertising