Step, Using the needle threader – SINGER 1050 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 6
Lead thread into thread guide
G
by drawing thread lightly to
the left until it
completely
slips into the left channel.
Step?
• Then draw thread through guide H from the rear of guide
to the right.
steps
Drawing 10 cm (4 inches) of thread down toward needle, lower
presser foot and thread needle
front to back.
Using the Needle Threader
Lower the presser foot.
Position the needle threader as illustrated, with the top of
the needle threader resting against the needle clamp which
correctly aligns the needle threader hook to the needle eye.
Pass the hook through the needle eye, guide thread into the
hook and draw the hook and thread through the needle eye.