Buttonholes, Buttonhole position, Chapter – SINGER 1050 User Manual
Page 67: Buttonhoies and biittoas
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter
7%
Buttonhoies and Biittoas
buttonholes
Your new machine comes complete with a built-in two step
buttonhole system. Before sewing on your garment always
make a test buttonhole duplicating the number of thicknesses
of fabric and interfacing if appropriate.
Buttonhole Position
Centre Line
—
1
--
I
Buttonhole
Finished Edge
of Garment
Diameter of Button
Accurate guidelines are essential to keep buttonholes at a
uniform distance from the edge of the garment, evenly spaced,
and on the grain of the fabric.
1. Mark the centre line of the garment using hand basting,
or using tailor’s chalk.
• Be sure that the space from the centre line to the finished
edge of the garment is at least equal to threequarters the
diameter of the button. With this spacing, the button will
not extend beyond the edge when the garment is buttoned.
• Make sure that the centre line marking follows a length
wise fabric thread.
66