Mock overedge, Method 2, Overedged seam finish – SINGER 1050 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mock Overedge
This finish is appropriate for buiky knits, fine tricots and fabrics
thatcuri or fray.
Method 2
» Makeatestsampie.
• Baste the garment together on the seam iine and fit in the
usuai way.
• After making any necessary adjustments, suggested in
Method 1, piace seam under presser foot. Stitch so that
the stitches on the ieft side of the pattern penetrate the
basted seam iine.
9
Press after stitching and trim away excess fabric to produce
a narrow seam edge. When the seam supports the garment,
omit the trimming step and press seam open in the usuai
way.
.1
Overedged Seam Finish
® Stitch: overedge stretch stitch ^
e Stitch width: i ^ i 5 ?
•
Stitch length: 2 - 2.5
•
General purpose needle plate
•
General purpose foot
* •
o Trim seam edges evenly.
• Place stitching over the trimmed edge of the seam allow-
A.
ance as illustrated.
53