Winding steps – SINGER 1050 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Winding Steps
B
We recommend the use of a moderate speed when winding
a bobbin.
1. Move bobbin winding button Ato extreme left.
2, Draw upper thread
away from you
between toes of presser
foot under
left side of presser foot,
then up from the front
and around presser foot screw
B.
Hold end of thread
firmly.
Start machine, run at moderate speed.
.r'x
3. Pull thread end away after a few coils have been wound,
e Watch the bobbin as it fills. Do not allow thread to wind
beyond the outside FULL ring C.
4. Close slide plate to release bobbin winding button tosewing
position.
To start sewing, pull thread back under presser foot and cut.
Place threads diagonally under foot to left side, position
needle in fabric where desired, lower presser foot, and
start machine.
21