SINGER 1050 User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6. Select left side of buttonhole ' ^ . To do this, slide pattern
group selector to right, then push pattern selector button
until light appears over the symbol.
7. Set stitch width control within the red buttonhole area G.
Start machine. Adjust the stitch width control within red
buttonhole area in order to obtain the desired width of
starting bar tack.
8. Complete left side of buttonhole. Stop machine when H
is aligned with K on buttonhole foot and the needle enters
the left side of side stitching. See illustration.
9. Select right side of buttonhole
¡J
by sliding pattern
selector button to the left. (This side must always be
stitched last.)
70