SINGER 1050 - Manual (Page 77)

i's CVirlL 9 /jr 1 JLir 1
cleaning the machine
Your machine will serve you perfectly for many years if you
take a few moments of your time to keep it clean. How often
you will need to clean the machine will depend on how often
you use it.
Caution: Before cleaning your machine, disconnect the power
line plug from the socket outlet.
Remove lint orfluff from exposed parts. With a soft cloth, clean:
« PresserbarA, and needle barB.
• Take-up lever
C and thread guides D, E and F.
• Remove needle plate as instructed on page 7 and, using
a brush, clean the rotating hook area G under the needle
plate and slide plate.
« Remove bobbin case H if there is a lot of lint in the area,
for cleaning. See page 77 for instructions.
• Machine surface (If necessary, dampen the cloth and use
a mild soap).
To remove lint which may collect under the window of the
see-through slide plate pull slide plate towards you and clean
from underneath with the lint brush.
Your machine requires no oiling under normal conditions.
Your SINGER representative or Approved Dealer will examine
the permanently lubricated parts whenever your sewing
machine requires servicing.
76