Applications, Zig-zag seam rnishes, Method 1 - trimmed seam finish – SINGER 1050 User Manual
Page 41: Method 2 - overedged seam rnish, Zig-zag seam finishes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
applications
Zig-Zag Seam Rnishes
Seam edges support the garment and should be given a
durable finish if the fabric is likely to ravel. There are two
methods of finishing seams in such fabrics: method 1 .trimming
after stitching seam edge, or method 2, overedging. Makea test
sample first to determine which method best suits your fabric.
Method 1 - Trimmed Seam Finish
iAAMAAAVVVVVVWVVXVVVVVVVVVVVVVVVV
hAMANW\/W^W)/^
• Stitch: zig-zag ^ or multi-stitch zig-zag
• Stitch width: to suit application or fabric
• Stitch length: to suit application or fabric
• General purpose needle plate
• General purpose foot
• Select appropriate stitch pattern.
• Adjust stitch width and length if necessary.
• Place stitching near the edge of the seam allowance.
• Trim seam edges evenly, as illustrated, after stitching is
completed.
Method 2 - Overedged Seam Rnish
• Stitch: zig-zag ^ or multi-stitch zig-zag <;
• Stitch width: to suit application or fabric
• Stitch length; to suit application or fabric
• General purpose needle plate
• General purpose foot
•
• Trim seam edges evenly.
• Adjust stitch length and width if necessary.
• Place stitching over the trimmed edge of the seam allow-
ance as iilustrated.
40