Shell stitch, Seam and overcast in one, Shelltucks – SINGER 118 FEATHERWEIGHT II User Manual

Page 30: Puntada de lenceria, Costura y sobrehilado en uno, Dobladillo de concha, Point de coquille, Couture et surjet en une seule opération, Ourlet en coquille, Sheli stitch

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SHELL STITCH °

Shell stitch is for seaming and overcasting
sheer, soft fabrics in one operation. It also

produces a delicate shell hem on lingerie
and other fine garments.

SEAM AND OVERCAST IN ONE

Place the right sides of the fabric together

and position under the presserfoot so that

the zig-zag part of the stitch sews just over
the raw edge.

SHELLTUCKS

Turn under the raw edge and press. Place
the fabric right side up so that the zigzag

part of the stitch sews just over the folded
edge, pulling the fabric in to form a shell
hem. Trim away excess fabric close to the

stitching line.

PUNTADA DE LENCERIA °

La puntada de lencería es para coser y

sobrehilar en una operación tejidos finos
y suaves. También produce un dobladillo
de concha delicado en lencería y otras

prendas finas.

COSTURA Y SOBREHILADO EN UNO

Colocar los derechos del tejido juntos y
posicionar debajo del prénsatelas, de
manera que la parte del zig-zag de la
puntada cosa sobre el borde del tejido.

DOBLADILLO DE CONCHA

Girar hacia abajo el borde del tejido y
planchar. Colocar el derecho del tejido
arriba, de manera que la parte del zig-zag
de la puntada cosa sobre el borde doblado,
estirando el tejido y formando un dobladillo
de concha.
Recortar el tejido sobrante cerca de la línea
de puntadas.

POINT DE COQUILLE °

Le point coquille est utilisé pour coudre et

surjeter des tissus fins en une seule
opération. Il peut être employé pour

réaliser un ourlet en coquille sur la linge­
rie ou tous vêtements fins.

COUTURE ET SURJET EN UNE
SEULE OPÉRATION

Placer le tissu endroit contre endroit sous
le pied. Coujez pour que le point s’effectu

sur le bord du tissu.

OURLET EN COQUILLE
Repliez le bord et faire un ourlet de 12 mm.
Placer l’endroit du tissu sous le pied de
manière à ce que le point se réalise sur la
pliure du tissu. Ceci tout en tirant le tissu
pour lui donner la forme d’une coquille.
Couper le tissu au ras de la pliure.

SB

Advertising