SINGER 14U 34B/234B User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Stretch overedge (Use regular or rolled hemming throat Plate)
Stretch overedge is ideal for sewing decorative collars, sleeves, skirt hems, etc. on loosely knit and woven
fabrics.
• Open looper cover and loosen differential feed adjusting lever thumb screw.
• Slide adjusting lever upward above the center mark, as required, to stretch, and tighten the thumb
screw (Fig. 1)
To sew a seam, apply gentle tension to the fabric by holding the seam lightly in front and back of the
presser foot. (Fig. 2)
Note: If amount of “stretch” is not correctly set in relation to the fabric being sewn, the fabric is apt to
shift away from the needle resulting in improperly sewn overedge seam. In such case, reset dif
ferential feed adjusting lever closer to the center mark.
Be sure to reset the differential feed adjusting lever to center mark for normal overedge stitching.
16