SINGER 319K User Manual
Page 104
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
102
To Adjust Rüffler for Gathering,
swing ad
justing finger F away from needle. Raise adjusting
lever E and move it until projection
D
can be
entered in slot marked ''1”. Insert material to
be ruflSed between two blue blades and under
separator guide. Draw material slightly back of
needle, lower presser bar and sew. For fine gather
ing, turn adjusting screw C upward to shorten
stroke. Set machine for a short stitch. For full
gathering, turn adjusting screw C downward to
lengthen stroke. Set the machine for a longer
stitchi
To Make a Ruffle and Sew It to
a Oarment in One Operation, insert
material to be ruffled between two blue
blades and under separator guide. Place
material to which ruffle is to be attached
under separator blade and under separator
guide. Proceed the same as for plain
gathering.
MATIRIAl
Fig. 200. Correct Position for Material
to he Ruffled
Fig. 201. Making a Ruffle and Attaching It in One Operation