Needle position control – SINGER 319K User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
32
NEEDLE POSITION CONTROL
Fig. 52
Fig. 52A
When needle position lever S is
set to the left on the dial, as
shown in Fig. 52, the machine
sews at the extreme left for
straight stitching and, as the
bight is changed from ”0” to
*'5”, the needle swings from
the extreme left, as shown
in Fig. 52A for zigzagging.
Fig. 53
Fig 53A
When needle position lever S
is set at the central position,
as shown in Fig. 53, the
needle swings equally to
the left and right of cen
ter, as shown in Fig. 53A.
RIGHT
Fig. 54
Fig. 54A
When needle position lever S
is set to the right, as shown
in Fig. 54, the needle swings
from
the
extreme
right,
as shown in Fig. 54A.
CAUTION: Left needle position, right needle position and stitch levers
in '"up”
position are used
only
with the general-purpose throat plate, for straight stitching as well as zigzag
stitching.
Raise needle out of fabric before changing positions of bight control, needle position
and stitch levers.