SINGER 319K User Manual
Page 83
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
81
FRINGED EDGES
Fig. 147. Following Drawn Thread
with All-purpose Presser Foot
Fig. 149. Blind Stitch Used for
Fringed Edge
Use: All-purpose Throat Plate
and All-purpose
Presser Foot
Right or Left Needle
Position
2 Bight
12 to 25 Stitch
Lever A
Blind Stitch Disc No. 3
Draw a thread marking
depth of fringe. Stitch
along this line. Beginning
at raw edge, draw out
threads up to stitched line.
Fig. 148. Wide Hemstitching
Wide hemstitching is done in same manner as fringed edges,
except that threads are drawn to mark width of hemstitching.
When using Blind Stitch Disc, stitch to complete one side of
hemstitching. Turn fabric and stitch second side, matching
stitches. Then draw remaining center threads between rows of
stitching.
Lever A or Blind Stitch Disc No. 3 are equally effective to use for
fringed edges and wide hemstitching.