Illlllil|l||llll|l|ll zigzag point—lever d vvvvvv – SINGER 319K User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AUTOMATIC STITCHING
Five automatic stitch designs are built into the machine. Merely lift the designated lever to
produce the stitch indicated on the lever. The maximum width of the stitch is achieved when
bight is set at 5. Narrower designs result from setting the bight at less than 5. An almost zero
stitch length gives a solid design, while a longer stitch length gives an open pattern. Twin needle
stitching is done at 3 bight or less.
Zigzag—Lever A
For; Buttonholes
Sewing buttons
Reinforcing seams
Hairline seams
Cording seams
Invisible seams on lace
illlllil|l||llll|l|ll
Zigzag Point—Lever D
vvvvvv^
Applique
Satin stitch
Script stitch
Shadow applique
Satin stitch scallop
Multiple Stitch Zigzag-
For: Reinforcing
Patching
Mending
Decorative stitching
Scallop—Lever C
A A
"Lever B / ^ ^ ^ ^ \
Overlapped seams
Abutted seams
Elastic seams
Binding blankets
For; Faced scallops
Decorative stitching
For; Decorative edging
Decorative border
Applique of bands
or lace
Ball—Lever E
Decorative applique
For; Motif designs
Border designs
Decorative applications
Monograms
Di„
i\rY~T'TT1
Blind Stitch
For; Hems
Facings
Zippers
Overedging seams and facings
Decorative stitching
Applying bands and lace
NOTE: To change the direction of pattern produced by FASHION Discs 5, 10, 15, 16, 17 and 18,
reverse the disc on the shaft.