To cord scallops – SINGER 319K User Manual
Page 82
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
80
TO CORD SCALLOPS
A finely corded edge is added to complete satin stitched
scallops and to finish the edge. Lead heavy duty thread as
a filler into eye of Satin Stitch Foot and carry it through
and under foot. See page 76 for threading the filler
thread. Position needle close to edge of scallop, lower foot
and stitch close to scallop, covering filler cord with
closely spaced stitches, crowding against scallop all along
the way.
Fig, 145. Cording the Scallops
.t'
' JFSSk\ .
s 'I
jmf
%
R
Fig, 146, Trimming Scalloped Edge
If scallops border a hem, cut away surplus of hem on
wrong side close to inside of scallop. If scallops form an
edge, cut away surplus border close to cording stitches on
outside of scallop, at the same time cutting away founda
tion crinoline or organdy.
Use: All-purpose Throat Plate
Satin Stitch Foot 105251
Central Needle Position
1 Bight
Almost 0 Stitch
Lever A
Medium Pressure Adjustment