To change fashion discs – SINGER 319K User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
33
Raise needle out of material.
Set stitch levers in "down” position.
Remove knurled nut Y.
Grasp edges of FASHION Disc Z and draw it
off shaft.
TO CHANGE FASHION DISCS
Place new FASHION Disc on shaft so that
pin A2 engages at slot B2.
Replace nut Y and tighten securely. To avoid
variation in stitching, FASHION Disc must
be held in position firmly.
Set bight and needle position levers to de
sired settings and proceed as for regular
Fig. 55. Step 1. Removing Knurled Nut
Advertising
This manual is related to the following products: