SINGER 319K - Manual (Page 27)

25
TO PREPARE FOR SEWING (continued)
1. Hold end of needle thread
with left hand and turn hand
wheel toward you until needle
goes down and up again, and
take-up lever returns to its
highest point.
Fig. 31
2. Pull up needle thread and bobbin thread
will come with it, as shown in Figs. 30, 31
and 32.
3. Lay both threads back
under presser foot diagonally
across feed to the right or left
depending upon which side of
the needle the material is to be
located. See Fig. 33. When
the presser foot is lowered the
threads will be firmly held be­
tween the feed and the presser
foot.
Fig. 33