Seaiw finishes, To overcast open seams, To finish seams in tricot or sheers – SINGER 319K User Manual
Page 67
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
65
SEAIW FINISHES
TO OVERCAST OPEN SEAMS
Turn raw edge toward wrong side and, while stitching, let it pass
over flanged toe of All-purpose Presser Foot and through slot.
Guide material so that needle, when swinging to the right,
pierces material exactly at edge.
Use: All-purpose Throat Plate and Presser Foot
Central Needle Position
2 Bight
15 Stitch
Lever A
TO FINISH SEAMS IN TRICOT OR SHEERS
Step 1.
Stitch seam with short straight stitching
using Straight Stitching Throat Plate and Straight
Stitching Presser Foot. Support material when
stitching as described on
page 27.
Step 2.
Finish seam edges together with stitching
controlled with the Blind Stitch Disc No. 3. Trim
seam allowance close to stitching. This finish pre
vents fraying and provides a fine smooth edge.
Use: (for seam finish) All-purpose Throat Plate
and Presser Foot
Central Needle Position
1 or 2 Bight
25 Stitch
Blind Stitch Disc No. 3
Fig. 109. Overcasting
Open Seams
Fig. 110. Finishing Seam in Tricot