Straight stitching – SINGER W610 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For straight sewing on fine fabric or very soft material,
it is advisable to use the straight stitch presser foot and
the straight stitch needle plate which are included in
your accessory box. Both have narrow needle slots.
(19, Fig. 1) loosen thumb screw and remove zigzag foot.
securely (Fig. 13).
To change needle plate (17, Fig. 1) remove screw and
with right hand and cover plate with the left (Fig. 12).
Press the right end of cover plate down gently until two
pins of needle plate slip off grooves in cover plate.
released the two plates will separate.
reversing the above procedure.
Put plates on machine and fasten securely with needle plate fix screws.
Set machine as follows;
(1) Buttonhole lever (10, Fig. 1) at “M” position.
(2) Pattern selector dial (5, Fig. 1) at “MANUAL” position.
(3) Zigzag width control (
8, Fig. 1) at “O”.
(4) Stitch length control (14, Fig. 1) to suit material being sewn.