Samples or creative embroidery – SINGER W610 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I D
With the machine set for a short stitch length, different designs can be made by swinging
the zigzag stitch width lever back and forth between O and 5 or any other combination of
widths. Set a rhythm for yourself and then proceed. After a while you will become quite
skillful, varying your designs by the speed of the machine, stitch length, and manipulation
of the zigzag control knob.
SAMPLES OR CREATIVE EMBROIDERY
“A” Sew a few stitches at 5 width, then allow knob to
spring back to O for a short period. Count, if neces
sary, to establish a rhythm.
“B” Set stop at 2 then move knob slowly back and forth
between numbers 2 and 5.
“C”
Set
stop
at
1.
Gradually
move
knob
from
1
to
5,
allowing it to snap back quickly.
“D” Set zigzag stitch width stop at 4, stitch length at 2.
Do a few zigzag stitches, drop feed for 3 or 4 stitches,
then raise it again. By operating the feed knob rhyth
mically it is not necessary to count stitches.
“E” Drop feed, set stitch width lock at 5, take 3 or 4 stitches, leave needle in left of
sti+ches. Pivot fabric on needle to make next daisy petal. Continue until flower design
is complete. Lock threads by setting stitch width at O and taking 3 or 4 stitches in
center of design.
Fig.
25