SINGER W610 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fold bias strip of fabric over cord. Loosen thumb screw and set foot so needle is centered
in needle hole. Machine bastes cord in place (Figs. 44~46).
To sew covered cord to material, reset adjustable foot so needle stitches closer to cord, and
on edge of base fabric.
SEWING IN ZIPPER
Loosen thumb screw and slide foot so needle enters center of needle hole. Guide metal of
zipper along edge of foot (Fig. 46). Stitching should be close to zipper to allow easy open
ing and closing. Adjust to sew from either right or left side, whichever is more convenient.