SINGER W610 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6. Set buttonhole control at number 2 position for bar tacking. Sew four or five stitches,
step
2.
7.
Set buttonhole control at number 3 for right hand side of buttonhole. This will set the
machine to sew in reverse. Sew right hand side of buttonhole, step 3.
8. Set buttonhole control at number 4 position for bar tack. Sew four or five stitches,
step 4.
9.
Cut the buttonhole opening with seam ripper, being careful not to cut the stitching.
If the cutting space is too narrow move red line on zigzag stitch width lock to the left. If
too much cutting space move to the right. If you plan to make buttonholes on sheer or soft
material, place tarlatan or paper under fabric which can be torn away after stitching.
20
Fig. 34