Care and maintenance of your machine – SINGER W610 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
26
CARE AND MAINTENANCE OF YOUR MACHINE
HOW TO OIL YOUR MACHINE
Your machine should be oiled occasionally to keep it operating smoothly-how often depends
on the amount of sewing you do. Before oiling the upper part of the sewing unit at points
indicated by arrows in Fig. 50 turn hand wheel toward you until the take-up lever is at its
lowest point. Avoid over-oiling, only a drop is needed at each point.
To oil parts under the bed of the machine, tip the unit back on its hinges and apply a drop
of oil at each point indicated in Fig. 51. The face plate opens sideways on hinges making
oiling and cleaning easy. Oil at spots indicated in Fig. 52.
Fig.
50
Fig.
51
HOW TO REPLACE LIGHT BULB
The lamp is built-in under the face plate. Open the face plate.
Unscrew bulb and replace with bulb of same size, which is avail
able from your sewing machine dealer.
ADJUSTING AND CHANGING “V” BELT
If it should ever become necessary to replace the belt on your machine, the hand wheel must
x:------- 4.
I ...
.-1 ■->/a ^ o r.)
r » i i +