Flat felled seam, Hand rolled effect, Quilting guide – SINGER W610 User Manual
Page 25: Seam gauge or cloth guide, The adjustable cording and zipper foot, Quiltingguide
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FLAT FELLED SEAM
Open out French seam and insert rolled edge in scroll of
hemmer. Edge stitch to lay seam flat.
HAND ROLLED EFFECT
Use a narrow zigzag stitch, just wide enough to catch both
edges of the narrow, rolled hem.
QUILTING GUIDE
This guide for making parallel rows of stitching Is attached
by placing the pronged holder between the presser foot and
the presser foot clamp screw (Fig. ^S). Adjust the curved
bar
to
press
lightly
on
the
fabric.
By
letting
the
guide
aid on the first stitching line, successive rows will be an
equal distance apart. When the bar is attached so that the
curved part is to the right of the needle. It may also serve
as a seam gauge.
SEAM GAUGE OR CLOTH GUIDE
Use the seam gauge as a guide for straight seams and even
rows of top stitching along edges of fabric. Fasten gauge
with accompanying screw to threaded hole in needle plate or
bed of machine (Fig. 43). Adjust to seam width desired.
THE ADJUSTABLE CORDING AND ZIPPER FOOT
This attachment is used to make and Insert covered cord
ing, and to sew in zippers. Loosen thumb screw to slide
foot to either right or left of needle.
Fig.
42
Fig. 43