SINGER White 5500 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
nging the N@@h
Step-1
needle “
bar
handwheel
needle
clamp screw
(1) Set the needle bar in the highest position
by turning the handwheel toward you.
(2) Loosen the needle clamp screw and take
out the needle.
Step-2
groove of the
(1) With the flat face away from you, insert a
new needle into the groove of the needle bar.
¡2) Push the needle until it reaches the stop
per and tighten the needle clamp screw
firmly.
-How to check your needles-
Proper needle
It is straight.
The gap is even.
Improper needle
Bent needle.
The point is sharp.
Blunt point.
~5—
Bent point.
3
^
Using defective or worn needles not
only causes stitch skipping, break
age of needles or snapping of thread;
it also can damage the rotary hook
and the needle plate.