SINGER White 5500 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Trouble
Probable Cause
Fabric not
moving
Dust of thread jamming on the feed dog.
Feed dog is lowered.
Breaking
needle
Improper needle setting.
Needle bent.
Needle clamp screw too loose.
Upper thread tension too tight.
Needle too thin for the fabric
Correct
Operation
Page 57
1
Changing pattern or width of the stitch with the
needle down in the fabric.
Setting stitch width more than 3.5 when sewing
with twin needle.
9
9
9
24.26
7
20
7
7
60
Not plugged in properly.
Light going
supply switch is not on
out
burnt out.
N.B. If .rouble ie ebll apparent in .he nrachine, please consul, your nearest dealer. Do no,
try to correct the fault by yourself
Changing the light bulb—
Step-1
Unplug the machine.
Open the face plate in the arrow direction.
Step-2
Step-3
Install a new bulb by
screwing it clockwise.
Plug in the machine.
60