How to 86w3, Thread tension for zigzag stitch – SINGER White 5500 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to 86w3
Step-1
Step-2
Place the fabric under the foot about
tcm 10.4") inside the edge.
Lower the presser foot.
Lower the needle by turning the hand
wheel toward you.
♦ Leave the ends of the threads of about
15cm (6"),
Guide the fabric by hand as it is fed.
Never pull too hard on it.
To reinforce the seam, set the machine for the straight stitch and sew in reverse at the
beginning and the ending of the seam.
Thread tension for zigzag stitch
For better appearance, the upper thread should be slightly visible in the wrong side of
the fabric.
Loosen the upper thread tension a little more than when sewing with the straight stitch.
Upper thread tension too tight Upper thread tension too loose
Correct tension
wrong side
wrong side ^
• wrong side ^
, ,
right side
^
right side
v
right side
The lower thread appears in
The upper thread appears too
the right side of the fabric.
much in the wrong side of the
fabric.
26