SINGER White 5500 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
adjusting screw
(2) Adjusting the tension
Turn the adjusting screw with the small screw
driver for adjustment.
* Be careful not to touch the lock screw when
adjusting the bobbin tension.
Inserting the bobbin case
Step-1
handwheel
Set the needle bar in the highest po
sition by turning the handwheel to
ward you.
Step-2
end of thread
¡1) Leave the end of the thread of about 10cm
(4") from the bobbin.
¡2) Holding the latch of the bobbin case with
your thumb and index finger, push the
bobbin case into the rotary hook.
(1) When the bobbin case is inserted, close the
latch.
(2) Close the shuttle cover.
13
Advertising