SINGER White 5500 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step*l
Winding the bobbin
thread
guide A
spool spool pin
-tfiread
\
guide A
thread guide B
Put the spool on the spool pin. Draw the thread from the spool pin through the thread
guides A and B as shown in (D @ and @.
Step-2
bobbin
Step-3
spindle
Wind the thread clockwise around the bob- Push the bobbin toward the handwheel and
press down the foot controller.
bin several times.
Push in the bobbin as far as it will go.
Step-4
The machine stops automatically when
winding is finished.
Return the spindle by pushing it in the
arrow direction.
* Be sure that the machine is not running.
• Not to place your fingers near the needle
bar. Needle bar may move a little when
starting to wind the bobbin.
* Never press the spindle while sewing.
Step-5
Take out the bobbin from the spindle and
cut the thread.
n