SINGER White 5500 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Upper Thraading
RàiiB6(fxÿ6t atict^iraandral^
■ yiinii* I
1
—, ^„••■ ■ ■ ■ u.i - -TITT
i i) Raise the presser foot lifter. ^ ^ ^ ^
(2) Set the needle bar in the highest position
by turning the handwheel toward you.
Tht^diH^ iippër^
Thread by following numbers ® — ® while
pressing the spool lightly with your index
finger.
spool of thread
Step-2
Step-3
Pass the thread to Then to the guide
the guides (I) and @
Step-4
tension
spring
guiding
plate
Step-6
Thread the take-up lever (
14
Lead the thread be
tween the two ten-
^nsion sion discs
discs ®
Lead the thread into the
hook of the guiding plate ©
by pulling the tension spring
to the right with the thread.
Thread the guides © and @
then the needle eye @ .
Leave an end of the thread of
about 15cm (6").