Rajae foot and needla ьвг, Threading the upper threat – SINGER White 5500 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Twin Ns«
ding
Rajae foot and needla Ьвг^
(1) Raise the presser foot lifter.
(2) Set the needle bar in the highest position
by turning the handwheel toward you.
Threading the upper threat^
Thread by following numbers ®
@ while pressing the two spools lightly with your fingers.
»Be careful at the points ® ® and ®, since the way
of threading is different from the normal
threading with one spool of thread.
Step-1
Рам the threads to
gether to the guides
Ф and
Ф
.
Step-4
tension
spring
Pass them separately to
the right and left at the
guide @.
guiding
plate ®-
tension
discs®.
Lead one of tl» threads
between the discs front
and middle and the
other one between
middle and back.
Lead the two threads to
gether into the hook of the
guiding plate ® by pulling the
tension spring to the right
with the threads.
Step-5
Thread the take-up lever
Thread the guides ©and®
then the two needle eyes ®.
Leave the ends of the threads
of about 15cm (6").
16