Thraadlng the lower thread – SINGER White 5500 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
inserting the Bobbin Case
Inaartlng the bobbin
!1) The end of the thread is away from you as
shown.
(2) Leave the end of the thread of about 10cm
(4") from the bobbin.
(3) Insert the bobbin into the bobbin case.
Thraadlng the lower thread
Step-1
Slide the thread into the slot of
the bobbin case.
Step-2
tension spring
Pulling the thread to the left, pass the thread
under the tension spring.
Step-3
Pass the thread through the bobbin thread
guide.
— How to adjust lower thread tension
(1) Checking the tension
Complete the threading of the lower thread.
Take out the end of the thread from the bobbin
thread guide.
Place the bobbin and the bobbin case on your palm.
Pick up the end of the thread and shake it gently.
At the proper tension, the bobbin case will gra
dually drop a small amount.
12