Machine setting – SINGER White 5500 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sawiili on Buttons
With the specially designed two-step foot lifter, even thick buttons can be sewn easily.
Machine setting
(1) Set the zigzag width
at "0".
(2) Place the button so
that the needle lo
wers into the left
hole.
(3) Lower the presser
foot.
(1) Turn the handwheel
until
the
needle
comes up above the
button.
(2) Set the zigzag width
so that the needle
is positioned right
above the right hole.
Step-4
(1) Sew the button on.
(2) Draw out the work
and cut off the thread
ends with 10cm (4")
left.
Draw the thread
ends through to the
wrong side and tie
a knot.
If a shank is required, insert a needle in the Centre of
the presser foot and sew over It. Re-set the needle
position at the mark.
34