How to sew – SINGER White 5500 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
^Machina setttngi)
^How to sew^
Step-1
Step-2
Step-3
r
C
)
(
)
w
To attach darning foot, see p.8.
Stretch the fabric on the hoop with the worn
-out part in the center.
Hold the hoop correctly as shown.
Place the upper thread under
through the hole of the foot.
Sew over the worn-out part, guiding the hoop
back and forth by hand.
]
Making stitches closely spaced gives a bener
finish.
t
* Be sure the presser foot is lowered.
|
Turn the fabric 90° and sew in the same way.
I
* By making the turning points blunt, the
darned part becomes softer and more flexible. |
39
Advertising