Feed dog, Rotary hook – SINGER White 5500 User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
l7aZe™;trsrj7oVaTw;„'“""^H^"‘‘
wnicn
IS
used for a few hours a day needs to
be
cleaned and oiled once a month.
Do not tamper with parts while cleaning or oiling.
* Be sure to unplug the machine while cleaning or oiling.
Feed dog
or other many troublet'^'^fheValways ^eL^irbe clean.'"’'’'“'"^' movement of the feed dog
(1) Set the needle in the highest position by
turning the handwheel toward you.
(2) Remove the needle, and the foot.
(3) Remove the needle plate, loosening the
screws with the large screwdriver.
(4) Brush off all the lint with the attached
cleaning brush.
Clean especially the upper part of the feed
dog and between the teeth.
Rotary hook
Dust or lint in the rotary hook cause the slow
so it always needs to be clean.
running of the machine or irregular stitches
(1) Open the shuttle cover and remove the
bobbin case.
(2) Brush off all the lint with the attached
cleaning brush.
»When the thread is rooted in the hook groove,
turn the handwheel away from you and take
out the thread.
57