Inserting the bobbin, Winding the bobbin – SINGER 6510 Scholastic User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
□ Inserting the bobbin
When inserting or removing the bobbin, the needle
must be fully raised.
1. Insert the bobbin in the bobbin case with the thread
running counterclockwise direction (arrow).
2. Pull the thread through the slit (A).
3-Draw the thread clockwise until it slips into the notch
(B).
4.Pull out about 15 cm (6 inches) of thread and attach
the bobbin cover plate. (C)
Attention:
Turn power switch to off ("O") before inserting or
removing the bobbin.
11
Advertising