Sewing on buttons (for model- 2 dials) – SINGER 6510 Scholastic User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Move the drop feed control to right side to lower the feed
dogs.(1)
Change presser foot to button sewing foot (2).
Position the work under the foot. Place the button in the desired
position and lower the foot. Set the pattern selector knob on (| )
and sew a few securing stitches. Select one of the two harrow
zig zag patterns according to the distance between the two
holes of the button. Turn the handwheel to check if the needle
goes into the right and the left hole of the button without hitting
the button.
Slowly sew on the button with about 10 stitches. Select pattern
(f) and sew a few securing stitches (3).
I
If a shank is required, place a darning needle on top of the
button and sew (4). For buttons with 4 holes, sew through the
front two holes first (3), push the work forward and then sew
through the back two holes (4).
□ Sewing on buttons (For model- 2 dials)