Inserting and changing needle – SINGER 6510 Scholastic User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
□ Inserting and changing needle
Change the needle regularly, especially if it is showing signs of
wear and causing problems. For best sewing results always
use SINGER Brand Needles.
Insert the needle following the illustrated instructions.
A. Loosen the needle clamp screw and tighten again after
inserting the new needle. (1)
B. The flat side of the shaft should be towards the back.
C/D. Insert the needle as far up as it will go.
Attention:
Turn power switch to off ("O").
Needles must be in perfect condition. (2)
Problems can occur with:
A. Bent needles
B. Blunt needles
C. Damaged points
12
Advertising