Free motion darning – SINGER 6510 Scholastic User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□ Free motion darning
* The darning foot is an optional accessory not included with
your machine.
Move the drop feed control to right to lower the feed dogs.
Set the pattern selector dial to (
) or ( i ).
Remove the presserfoot clamp (1).
Attach the darning foot to the presser foot holder. The lever (A)
should be behind the needle clamp screw (B). Press the
darning foot on firmly from behind with your index finger and
tighten the screw (C) (2).
First sew around the edge of the hole (to secure the threads)
(3). First row: Always work from left to right. Turn work by 1/4
and oversew.
A darning ring is recommended for easier sewing and better
results.
Note:
Free motion darning is accomplished without the sewing
machine internal feed system. Movement of the fabric is
controlled by the operator. It is necessary to coordinate
sewing speed and movement of fabric.
Stitch width dial
39