ADLINK PCI-9524 - Manual (Page 40)

24 Getting Started
PCI-9524 ADLINK Technology Inc.
User’s Manual Copyright 2008
2.4 Installing the Card
To install the card:
1. Turn off the system/chassis and disconnect the power
plug from the power source.
2. Remove the system/chassis cover.
3. Select the PCI slot that you intend to use, then remove
the bracket opposite the slot, if any.
4. Align the card connectors (golden fingers) with the slot,
then press the card firmly until the card is completely
seated on the slot.
5. Secure the card to the chassis with a screw.
6. Replace the system/chassis cover.
7. Connect the power plug to a power source, then turn on
the system/chassis.