ADLINK PCI-8124-C - Manual (Page 101)

Function Library 91
I16 Enable :
 0: Disable (Default)
 1: Enable
I16 *DetectStatus : Status in bit format.
 bit 0: Noise occurred form EA, the signal is less than 100ns,
this bit will turn ON
 bit 1: Noise occurred form EB, the signal is less than 100ns,
this bit will turn ON
 bit 2: Noise occurred form EZ, the signal is less than 100ns,
this bit will turn ON
 bit 3: Noise occurred form LTC, the signal is less than
100ns, this bit will turn ON
 bit 4: Pulse lost occurred, If the the signal is fast than
decode speed. this bit will turned on.
F64 *PwmCount : 32 bit counter.
I32 *CmpData : Next linear compare data.
F64 *Count : 32 bit count remaining trigger counter.